USB to DS-101 / DS-102 / RS-232
Version 3.2 is now available. This new revision now comes with a ruggedized USB-C connection, stronger case, and UID label. Providing a more secure and connection to the host.
WebSec Corporation’s USB to DS-101 / DS-102 / RS-232 adapter is an innovative engineering solution for the EKMS and KMI community.
UPhil is capable of performing all protocol communications defined in the EKMS-308F. It contains isolated circuitry, optical switching and over-voltage protection. It has been tested and works a number of ECU including high altitude and high capacitance ECUs. UPhil can be controlled through a well defined API to set the protocol, speed, led, wake-up, CTS and an number or other parameters.
USB Mini B to 6-pin Fill Port – Part #: 07DF
Note: Export Controlled. These devices are subject to United States ITAR/EAR export restrictions. Email or call us for export information.
Note: Export Controlled. These devices may be subject to United States ITAR/EAR export restrictions.
USB-C to 6-pin Fill Port – Part #: 07DF
Lead Free Process-RoHS
Export Controlled. These devices may be subject to
Schedule B/HTS code is 8471.80.1000
United States ITAR/EAR export restrictions.
|08/12/2022||CDROM: Updated firmware for new UPhil version 3.2 . Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.|
|08/10/2022||CDROM: Updated firmware to include new UPhil version 3.2. Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.|
|02/21/2022||CDROM: Fixed firmware for sending DS-102 with some equipment. Updated the ds101fillkey program to be able to send both DS-101 and RS-232. Only UPhil supports RS-232.|
|01/23/2022||CDROM: Updated the device drivers to recognize new USB vendor and product id.
This will add the COM port as “UPhil COM Port” as the description for backward compatibility.
|12/30/2021||CDROM: Updated the ds101fillkey application (load.exe) to load the firmware for UPhil V2.1. It will also load the UPhil v1x hardware as well as recognizing the Easy-DS101 adapter. Modified the -loop option to send the key/data over and over again. Good for doing TEMPEST testing. Added C# sample code and library for recognizing and and loading with the UPhil or Easy-DS101. The C# example is uses .Net 4.6.1.|
|7/23/2021||CDROM: Device drivers now support new hardware revision 2.1 as well as previous hardware revisions. The application KPU MGUE now provides support for both Easy DS-101 and UPhil. The ds102 application has been modified and updated with new source code.|
|11/9/2020||CDROM: Major update to the ds101fillkey application. This application now works with both UPhil and Easy DS-101. It can information to more than one connected device. It can now send GMT or local time to a KIV-77, KIV-78, KIV-79 or MIDS JTRS. It has a second DS-101 algorithm engine for sending key/data to an ECU.|
|09/17/2020||CDROM: Added more applications.|
|8/14/2017||DS-102: Program to send and receive DS-102 keys in a variety of different DS-102 fill modes. This would include CFD, KOI-18, SINCGARS, and SINCGARS Mode 2. Updated to allow for variable timing after a CTS is received in CFD mode.|
|1/16/2017||DS-102: Program to send and receive DS-102 keys in a variety of different DS-102 fill modes. This would include CFD, KOI-18, SINCGARS, and SINCGARS Mode 2.|
|1/16/2017||CDROM: Added support for SINCGARS Mode 2 and fixed a potential issue when sending a command and reading back values. Updated the program manual to reflect the newest changes.|
|10/04/2016||CDROM: Fixed install to support COM10 and above.|
|08/02/2016||CDROM: Fixed DS-102 sending issue for SINCGARS Mode 1 while looking for multiple CTS signals.|
|6/08/2016||CDROM: Added automatic active zeroize after sending data. Added two active zeroize user commands: one for zeroizing data and a second command to zeroize the firmware on the UPhil device. Updated programming manual.|