Support

CDROM: Updated expired driver HSM signatures to allow installation onto newer Windows versions (e.g. 11). Updated UPhilConfig to allow the UPhil to be placed in the middle of a DS-101 bus or at the end of the bus. Also, updated the supporting C/C++ library dlls. Updated DS101FillKey (load.exe) to enable or disable bus termination.

CDROM: Updated software to work with computer that have noisy USB affecting the DS-101.  Also updated the DS-102.  The new load.exe also supports KIV-77 and KIV-79 using multiple DUs in a single file.  Fixed issue with flashing LED.

CDROM: Depricated.  Please use 2023-08-15 Build.  Updated software to work with computer that have noisy USB affecting the DS-101.  Also updated the DS-102.  The new load.exe also supports KIV-77 and KIV-79 using multiple DUs in a single file.

CDROM: Updated software to work with new patches for Windows 10/11 that disabled USB connectivity. Replaced the KPU MGUE application with a newer KPU application. Fixed issue in Version 3.2 firmware that can occur if loading the firmware from the host too quickly.

CDROM: Updated firmware for new UPhil version 3.2 . Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.

CDROM: Updated firmware to include new UPhil version 3.2. Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.

CDROM: Fixed firmware for sending DS-102 with some equipment. Updated the ds101fillkey program to be able to send both DS-101 and RS-232. Only UPhil supports RS-232.

CDROM: Updated the device drivers to recognize new USB vendor and product id.
This will add the COM port as “UPhil COM Port” as the description for backward compatibility.

2023_08_15: Windows 10/11 TTL Control Application installer.  Sets time and Mode 5 IFF mission data to the TTL.  Time can be set from Network, Local, IRIG-B, SAASM, DAGR, GPS, HaveQuick, or another TTL.  Keeps accurate time for 9 months.

2024_11_13: Updated EKMS.exe command line application. This will parse a ds101 fill key with Send Tag selected operation (not MIDS JTRS tagged) and put it into a directory structure.  The command like is ‘ EKMS.exe -tasks receivekey -protocol ds101 -files.outputpath <output dir> -files.outputkeyandtag true’.  For more options type ‘Ekms.exe -help’.

2024_11_06: Update for EPLRS and XNET for Version 3.2.  Needed to swap D+ and D-. Added register in firmware to allow it to switch back to old mode.

2024_08_05: Update for EPLRS and XNET