SOFTWARE

UPhil/Easy DS-101 CDROM

CDROM: Updated software to work with computer that have noisy USB affecting the DS-101.  Also updated the DS-102.  The new load.exe also supports KIV-77 and KIV-79 using multiple DUs in a single file.  Fixed issue with flashing LED.

CDROM: Depricated.  Please use 2023-08-15 Build.  Updated software to work with computer that have noisy USB affecting the DS-101.  Also updated the DS-102.  The new load.exe also supports KIV-77 and KIV-79 using multiple DUs in a single file.

CDROM: Updated software to work with new patches for Windows 10/11 that disabled USB connectivity. Replaced the KPU MGUE application with a newer KPU application. Fixed issue in Version 3.2 firmware that can occur if loading the firmware from the host too quickly.

CDROM: Updated firmware for new UPhil version 3.2 . Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.

CDROM: Updated firmware to include new UPhil version 3.2. Also, updated the firmware for RS-232 to support loading of GPS for PRC-161/PRC-163/PRC-167.

CDROM: Fixed firmware for sending DS-102 with some equipment. Updated the ds101fillkey program to be able to send both DS-101 and RS-232. Only UPhil supports RS-232.

CDROM: Updated the device drivers to recognize new USB vendor and product id.
This will add the COM port as “UPhil COM Port” as the description for backward compatibility.

CDROM: Updated the ds101fillkey application (load.exe) to load the firmware for UPhil V2.1. It will also load the UPhil v1x hardware as well as recognizing the Easy-DS101 adapter. Modified the -loop option to send the key/data over and over again. Good for doing TEMPEST testing. Added C# sample code and library for recognizing and and loading with the UPhil or Easy-DS101. The C# example is uses .Net 4.6.1.

CDROM: Device drivers now support new hardware revision 2.1 as well as previous hardware revisions. The application KPU MGUE now provides support for both Easy DS-101 and UPhil. The ds102 application has been modified and updated with new source code.

CDROM: Major update to the ds101fillkey application. This application now works with both UPhil and Easy DS-101. It can information to more than one connected device. It can now send GMT or local time to a KIV-77, KIV-78, KIV-79 or MIDS JTRS. It has a second DS-101 algorithm engine for sending key/data to an ECU.

CDROM: Added more applications.

Trusted Time Loader (TTL)

2023_08_15: Windows 10/11 TTL Control Application installer.  Sets time and Mode 5 IFF mission data to the TTL.  Time can be set from Network, Local, IRIG-B, SAASM, DAGR, GPS, HaveQuick, or another TTL.  Keeps accurate time for 9 months.

PATCHES / ApplIcations

UPhil/Easy DS-101

DS101FillKey (load.exe): Added a command line switch to turn on or off DS-101 line termination.  If turned off UPhil can be in the middle of a DS-101 bus. If turned on then it expects to be at the end of a DS-101 bus.

DS101FillKey (load.exe): Updated to wait for only 1 second before trying to send and added a printout of the connected ECUs AXID Response.

UphilConfig: Updated the firmware to support DS-102 case.  Also, added minimize command line option.  UPhilConfig.exe -MinimizeOnLoad

UphilConfig: Updated the firmware to and minor changes.

ds101FillKey: Updated the load.exe program to allow for Mode 5 IFF Set Time using a manually entered value and added a new switch for setting Mode 5 Mission Data.